Snap-on continues to release tools to make our shops more productive. They recently introduced the Snap-on 12-Outlet Power Strip (#92278). They sent us a sample to test out and the following are some thoughts on this new product.
There’s no scouting for an outlet with the new Snap-on 12-Outlet Power Strip. Mount it above the workbench, and you have power at your finger tips. The 12-outlet design is ideal for home and garage use. The power strip’s housing is constructed of corrosion-resistant anodized aluminum and features a 15-amp circuit breaker and a 6-ft., 14-gauge, 3-conductor contractor grade power cord. Mounting hardware is provided. Designed for indoor use only, the Snap-on 12-Outlet Power Strip (#92278, $29.99) is available at Costco stores nationwide.
As you can see above we set up our new Snap-on power strip on the wall adjacent to our table saw. This particular table saw is located in the garage where storage is at a premium so it often times acts as a workbench. Setting up the power strip in this location was perfect for charging our batteries and working with small power tools.
Installing the Snap-on power strip was very easy. We installed two power strips, one on a plywood wall and another on a regular stud wall as shown above. The power strip is mounted to the wall with two plastic holding brackets (see the black bracket just to the right of the word Snap-on above). The brackets are attached to the wall with two supplied wood screws. It literally takes one minute to install the power strip.
The power strip is constructed of a durable aluminum casing that’s sure to hold up to the rigors of the shop. Once installed on the wall the power strip felt very sturdy, solid and well built. The power strip has a 15 amp breaker, a 6 foot cord, and it comes with all the mounting hardware. Ultimately the quality that we usually associate with Snap-on is evident in this product.
Overall the Snap-on power strip was impressive. It’s built of quality materials and sells for a reasonable price ($30 at Costco). While there are some people who are sure to criticize a Snap-on product that’s not marketed out of the truck I would say it doesn’t matter. I too was a bit skeptical but after using the product I can say it’s of the same quality as their other products. If you’re in the market for a new shop power strip give this one a look.
Which is Better a Stick Nailer or Coil Nailer? Framers have many choices in nailers…
Estimating How Many Nails for a New Roof When it comes to estimating materials for…
Composite / PVC Decking Layout Tips and Advice Composite and PVC decking have really changed…
Benefits of ERV Systems (Energy Recovery Ventilator) If you're building a new home or doing…
Vermiculite Attic Insulation If your home was built before 1990 there is a chance it…
Arc Fault (AFCI) Circuit Breakers Tripping Often An arc-fault circuit interrupter (AFCI) or arc-fault detection…