The Ryobi RP4010 Laser Distance Measure boasts the following features according to the manufacturer:
I’ve come to find laser distance measuring devices extremely useful in my line of work. They are perfect for anyone that does estimating. These devices are also very useful if you do field measurements for verification of dimensions.
The TEK4 RP4010 Laser Distance Measure is great for measuring distances, areas, volumes and even indirect measurements such as the hypotenuse of a triangle. The RP4010 also allows you to add and subtract measurements from the previous measurement. This is extremely useful when keeping track of room areas or running perimeter measurements.
When I tested the RP4010 I was able to quickly measure rooms in almost no time. I was able to quickly measure the length and width of a room along with the ceiling height. The RP4010 also calculated the area and volume of the room. Obviously this makes estimating quantities for a construction project very quick, accurate and convenient.
The manufacturer publishes an accuracy of +/- one-sixteenth (1/16) of an inch. I had trouble repeating that kind of accuracy and found the device was only able to consistently measure distances to +/- one-eighth (1/8) to one-quarter (1/4) of an inch. However, even at that accuracy I found the tool to be VERY useful. The reality is anyone using this tool to measure distances and areas with greater precision than that should use a different method.
The TEK4 RP4010 is very easy to use. I found the controls to be intuitive and helpful. The only issue I had (albeit a small issue) was inserting the battery pack the first time. It’s not easy to see exactly how the battery goes into the compartment so I inserted it the wrong direction the first time. However, once I figured it out I didn’t have anymore problems. I really like that this tool uses the same battery pack that all the Ryobi TEK4 tools use.
Once again I was impressed with the TEK4 line of tools. This is the second one that I’ve reviewed and I was very happy with it. In fact, this laser measuring device will have a permanent home in my truck so I can use it on the job site. I definitely recommend the TEK4 RP4010 to anyone that’s looking for a good priced laser distance measuring device.
If you’d like to buy the RP4010 Professional Laser Distance Measure it’s available at The Home Depot for $149.00.
Which is Better a Stick Nailer or Coil Nailer? Framers have many choices in nailers…
Estimating How Many Nails for a New Roof When it comes to estimating materials for…
Composite / PVC Decking Layout Tips and Advice Composite and PVC decking have really changed…
Benefits of ERV Systems (Energy Recovery Ventilator) If you're building a new home or doing…
Vermiculite Attic Insulation If your home was built before 1990 there is a chance it…
Arc Fault (AFCI) Circuit Breakers Tripping Often An arc-fault circuit interrupter (AFCI) or arc-fault detection…
View Comments
How do I change the distance from foot-inches to foot-tenths
Is that feature even available?