Kleer trim boards are a rigid cellular PVC board that comes in standard 1x and 5/4 thicknesses. For this particular house we’re using a 1×8 sub-fascia with a 1×3 shadow fascia. We’re also using a keystone detail at the peak as you can see in the photo (I’ll explain a practical reason for this below).
Obviously the biggest reason for using a PVC trim board is long term maintenance combined with traditional architectural appeal. PVC trim boards will not rot, twist, split or warp. In addition you can leave it unpainted if you like or paint it to match a certain color scheme. The other feature that I really like is you can cut, mill, plane and fabricate with PVC trim boards just as you would with a wood product.
Having used this product on many houses over the last couple of years I’d like to share some tips and suggestions.
Installation Tips
You can use the Bostitch N66C-1 1-1/4-Inch to 2-1/2-Inch Coil Siding Nailer with Bostitch 2″ 15 Stainless Steel Coil Siding Nails to attach PVC fascia trim boards.
PVC trim boards are manufactured by many different companies today. You will find most of them are very close in price. Typically PVC trim costs about 2 or 3 times what primed pine costs. However, if you think about the longevity and lack of painting and maintenance I think the price is well worth the investment.
All of the exterior trim on our new home is PVC including the fascia. We also used PVC lattice under the porch.
Which is Better a Stick Nailer or Coil Nailer? Framers have many choices in nailers…
Estimating How Many Nails for a New Roof When it comes to estimating materials for…
Composite / PVC Decking Layout Tips and Advice Composite and PVC decking have really changed…
Benefits of ERV Systems (Energy Recovery Ventilator) If you're building a new home or doing…
Vermiculite Attic Insulation If your home was built before 1990 there is a chance it…
Arc Fault (AFCI) Circuit Breakers Tripping Often An arc-fault circuit interrupter (AFCI) or arc-fault detection…
View Comments
Hi.
I am a homeowner in Ohio and my home was built 2 years ago. I have PVC trim throughout the exterior, and it has pulled away from the house in many places, and most of the joints are separating. It is a mess.
After reading your post, I now know why. Finish nails were used, and the joints were not glued.
I now have to figure out how to repair the trim, or whether I need to have whole thing redone, which would be a disaster.
It seems that going around and re-nailing it with Stainless steel coil siding nails would help with the "pulling away" situation, but I am at a loss for what to do about the 1/8" to 1/4" (more in some places) gaps in the joints. Any suggestions?
Thanks!
Sean
@ Sean - You're not alone with your pvc trim troubles. New products like this always run into unexpected issues that take time to correct. My new home also has the same issue and I've been slowly fixing the problem. At this point you really only have two options.
Option #1 - Remove all the trim and start over. This is obviously very expensive and not what I plan to do.
Option #2 - Nail the trim properly, use a ring shank stainless steel nail with a head. Then you can fill the gaps with "bond and fill" pvc filler.
Do these PVC fascia boards have a wood-like texture? Or are they usually smooth?
I've seen quite a bit of new construction use PVC railing and have never liked the look or feel. That is personal preference, of course. I may not even be able to see the texture of the fascia boards from the ground (I have a 2-story house), so perhaps a lack of texture isn't as big an issue as I'm making it out to be...anyway, thanks for the heads up for the expanding/shrinking issues that PVC boards have!
@ Michael Stalker - Most PVC trim comes smooth on one side and textured on the other. This way you can choose which look you like better.
@ Michael Stalker – if you go for the textured look it can come reversible. Versatex is another PVC trim that carries both smooth and they have a timber ridge finish. Their timber ridge matched close to Hardie siding.
We are considering using PVC fascia boards 1x10 as the baseframe for a large metal greenhouse. Can mending plates and corner brackets be used to secure the boards together even though they are expand and contract with weather fluctuations? Would there be concerns about connecting the PVC boards to pole brackets?
You can connect to them, but screws don't have great holding power. If you're using the PVC as just a shim, and securing down through the pvc into something more secure then I think it will work great.
How does the trim hold up to fading. I want to use white so I dont have to paint but worried it will get that yellow tint. Also any other recommendations other than the types of nails. I am looking to use it as trim around the roofline.
Thank you
Daymon - The trim does not yellow (at least the brands we've used). However, I do recommend painting it for a couple reasons (I'll explain below). The good news is, once painted, the paint lasts much longer than on wood.
- If you don't paint it, it has a tendency to get mildew/mold in certain locations depending on sun, etc.
- The paint helps hide the fasteners. I actually prefer using screws with plugs to nailing it now.
Good luck.
I have a shed that I did not install but was install directy on a concrete pool deck. Parts of the sill and plywood sheathing rotted. I replaced the rotted sill and cut the plywood sheathing 12 inches from the ground all the way around and instead of plywood, I used PVC boards to protect from water and insects. I now am concerned that I could have an issue with shrink and expand. Should I leave the PVC or should I replace it with PT plywood?
It moves quite a bit with temperature but it should be fine.
I am installing pvc fascia on our garage. I need to join two pieces together to span the length. Should I cut angles so they join together better? If so, what degree cut works best?
Thanks!
I like using a 30 degree skarf joint.
I am thinking about using Cellular PVC (same as the PVC mentioned here?) to replace our wood facia, because of carpenter bees. I read that expansion/shrinkage becomes an issue for runs 18 feet or longer. Does this mean one single board to make that run or multiple boards used to make the run?
Thanks!