If you use pnuematic nail guns then you know collated framing nails typically come held together in strips by plastic or paper. Over the years it seems as though the plastic collated nails have dominated the market place with very few manufacturers offering the paper version. However, recent changes by some manufacturers has seen an increase in the use of paper collated nails.
The big question is therefore which is better? Paper or Plastic? I’m not sure I have an answer myself for this debate but we have had some great luck recently using paper collated nails. We recently tested several new pneumatic nailers from Paslode and Duo-Fast which all used paper collated nails. We were pleasantly surprised by the reduced occurrences of jambs and the added benefit of not having small pieces of plastic shooting out of the guns at us.
So far our experience certainly justifies the idea that paper collated nails are less likely to jamb and therefore an improvement on crew productivity. Which do you use? Paper or Plastic?
Which is Better a Stick Nailer or Coil Nailer? Framers have many choices in nailers…
Estimating How Many Nails for a New Roof When it comes to estimating materials for…
Composite / PVC Decking Layout Tips and Advice Composite and PVC decking have really changed…
Benefits of ERV Systems (Energy Recovery Ventilator) If you're building a new home or doing…
Vermiculite Attic Insulation If your home was built before 1990 there is a chance it…
Arc Fault (AFCI) Circuit Breakers Tripping Often An arc-fault circuit interrupter (AFCI) or arc-fault detection…
View Comments
It seems to me that collated nails are far cheaper than the nearest equivalent regular nails?
Therefore is there any reason not to buy collated nails whether for use with a nailgun - or to use with a regular hammer?! Just strip the paper and use a hammer.
Am I mistaken here?
Not sure where you're buying nails, but buying bulk nails by the pound (hand bangers as we like to call them) is way cheaper than collated nails.
I HAVE A HUSKY FRAMING NAILER(MPN 1001 394 993)SHOULD I BE ABLE TO USE EITHER, PAPER OR PLASTIC? IS THERE A DIFFERENCE IN MEASURE FROM NAIL TO NAIL BETWEEN THE TWO? MANY THANKS
I believe those are plastic collated.
I have a Bostitch F21PL. It calls for 21deg. plastic collated nails. I have some boxes of pater collated 21 deg nails, so is there any problem with using those in this gun?
Afraid not.
Saw the post by Dave Erickson whom has a Bostitch F21PL nailer asking if he could use some paper collated nails. Your answer was " Afraid not" your saying that they can not be used is that correct ?
Plastic collated nails are to most IDIOTIC invention ever!!!!
Generally speaking, the head on the plastic collated nails is larger. We never have any real problems with them on the construction site as far as jambs go. The paper collated hold about 10 more nails per strip though. So for a gun that holds 2 strips, that's 20 more nails. Guys will spend less time in the day switching out nails. In my mind the obvious way to go for production framing is the coil nails. These have a larger head, and can hold many more nails. Personally between plastic and paper, I prefer the plastic because the bigger head. This way, if you'r sheathing or something like that, it's a good fit, more versatile.
I wanted to know the answer to the same question but the answer is very unclear to me, I have a Hitachi NR 90AE(S1) Plastic collated nailer,Can I use paper collated nails in this gun?
Things could have changed since I was selling building materials. At that time I asked the new guy/gofer who didn't know which nails they needed on the job if he needed paper or plastic. Plastic was 21 degree, paper was 30 degree.
I have a old Cummins 2300 framing nailer 21 degree. I'm sure its a generic of a major brand nailer. Any thoughts on what model this gun is cloned after?
I like paper because it doesn't create micro plastic debris whenever you shoot nails. Literally framing houses leaves tons of little microplastic trash everywhere that just blows into everything wherever you're working.
If I was smart I would start a lobbying consultancy and work with cities in California especially with this topic...There's all ready a million requirements and stamps on blueprints...why not require gun nails that don't add more microplastic debris to the environment...
Put Grip Rite out of business if they don't want to switch production to a more sustainable product.
Come at me.
In summary, plastic collated nails leave debris but have a larger head, paper leaves no debris and more capacity with potentially fewer jambs (depending on the gun and the operator).
Degree ?
Well the debris is a non-issue in my book, the plastic is nothing compared to other debris in the site, sawdust, scrap, trash, etc. It honestly comes down to availability in my opinion.