Categories: Fencing

Oops!: 5 Common Fence Mistakes To Avoid

So you’ve decided to buy a fence, but you’re probably nervous that some unseen problem will arise to ruin your plans. But don’t worry! This article will explain 5 common mistakes to avoid.

  1. Make sure that the underground utilities are clearly marked. If you do not mark your utility lines, the fence installers could potentially sever or damage them. This damage can be expensive and time consuming to fix, so it’s worth taking the time to mark them clearly.
  2. Make sure to know the boundary lines of property. Make sure that your fence isn’t built on your neighbor’s property by defining your property lines before installation begins. Having to remove sections of fencing because they extend off your property is expensive, time consuming, and can severely alter the original fence design.
  3. Investigate local zoning regulations. Every county has different zoning regulations that dictate what you can and cannot build on your property. If you break zoning regulations, you’ll be fined and have to remove the fencing that is in violation. Needless to say, this can be an expensive and aggravating experience that can be easily avoided by obtaining the necessary information ahead of time.
  4. Pool fence gates open outward. It’s the law!
  5. Make sure you have the right ground clearance. If your fence is too high off the ground then your dog or child can easily escape. Also, too much clearance allows unwanted pests to enter your property. However, if your fence is too low to the ground, then maintenance and grass cutting are difficult. Therefore, many buyers design their fence to be two inches above the ground.

Fencequotes.com is the place to find the best deal on Fence Installation, Deck Installation and Railing Installation.  How does it work? Fill out a simple form and receive price quotes from up to four different suppliers.  Save time and money. Our service is 100% FREE. For more options and information, here are some great resources regarding fencing and its various materials:
PVC Fence Installation
Vinyl Fence Installation
Aluminum Fence Installation
Chain Link Fence Installation

Todd Fratzel

I'm full time builder for a large construction company in New Hampshire. I run their design-build division that specializes in custom homes, commercial design-build projects and sub-divisions. I'm also a licensed civil and structural engineer with extensive experience in civil and structural design and home construction. My hope is that I can share my experience in the home construction, home improvement and home renovation profession with other builders and home owners. I'm also the Editor-in-Chief and Founder of Tool Box Buzz. Please feel free to contact me if you have any questions, suggestions or you'd like to inquire about advertising on this site.

View Comments

  • Always remember to get HOA approval before building your fence as well! There have been numerous times that I have had a customer that was tearing down or relocating a perfectly good fence because they neglected the HOA (Home Owners Association) for their subdivision.

    Keith

Share
Published by
Todd Fratzel

Recent Posts

Framing Stick Nailer vs Coil Nailer

Which is Better a Stick Nailer or Coil Nailer? Framers have many choices in nailers…

11 months ago

How Many Roofing Nails Per Square of Shingles

Estimating How Many Nails for a New Roof When it comes to estimating materials for…

11 months ago

Composite / PVC Decking – Layout Tips & Advice

Composite / PVC Decking Layout Tips and Advice Composite and PVC decking have really changed…

12 months ago

Benefits of an ERV System (Energy Recovery Ventilator)

Benefits of ERV Systems (Energy Recovery Ventilator) If you're building a new home or doing…

2 years ago

Vermiculite Attic Insulation Abatement

Vermiculite Attic Insulation If your home was built before 1990 there is a chance it…

2 years ago

Nuisance Tripping of AFCI (Arc Fault) Circuit Breakers

Arc Fault (AFCI) Circuit Breakers Tripping Often An arc-fault circuit interrupter (AFCI) or arc-fault detection…

3 years ago