The unit has 4 wires, a green, white, blue and black. The installation instructions (as usual these directions are not very good) include a wiring diagram that says:
1. Connect the green wire to the ground.
2. Connect the black wire to the line voltage.
4. Connect the white wire to all of the neutrals.
I will do a post this weekend on how to wire one of these up. The one problem I can see is the device is fairly large so fitting all the wires, wire nuts and device into the box will most likely be a HUGE challenge.
See my post, How To Install A Leviton 6260M Electronic Timer Switch, on how I installed these new timer switches.
Which is Better a Stick Nailer or Coil Nailer? Framers have many choices in nailers…
Estimating How Many Nails for a New Roof When it comes to estimating materials for…
Composite / PVC Decking Layout Tips and Advice Composite and PVC decking have really changed…
Benefits of ERV Systems (Energy Recovery Ventilator) If you're building a new home or doing…
Vermiculite Attic Insulation If your home was built before 1990 there is a chance it…
Arc Fault (AFCI) Circuit Breakers Tripping Often An arc-fault circuit interrupter (AFCI) or arc-fault detection…