The following maintenance items are suggested annually:
1. Lubricate front axle pivot, axle spindles, mower spindles, pivot points, and lift pedal.
2. Change engine oil and filter.
3. Replace spark plugs.
4. Replace air filter element (foam and paper).
5. Replace fuel filter.
6. Clean engine cooling fins.
7. Check mower belt.
8. Sharpen / replace blades.
9. Clean bottom side of mowing deck.
10. Check tire pressure.
Which is Better a Stick Nailer or Coil Nailer? Framers have many choices in nailers…
Estimating How Many Nails for a New Roof When it comes to estimating materials for…
Composite / PVC Decking Layout Tips and Advice Composite and PVC decking have really changed…
Benefits of ERV Systems (Energy Recovery Ventilator) If you're building a new home or doing…
Vermiculite Attic Insulation If your home was built before 1990 there is a chance it…
Arc Fault (AFCI) Circuit Breakers Tripping Often An arc-fault circuit interrupter (AFCI) or arc-fault detection…
View Comments
Thanks for these very helpful summaries of X300 maintenance operations! As they say, "A picture is worth a thousand words."
How do you start the john deere x300
Is that a trick question? Turn the key and use the choke.
How do you get that Yellow cap off on the rear wheels. I have a flat but I can't seem to get the cap off. What am I doing wrong??
Thanks
Tim - Not really sure as I've never removed them.
What is the optimal tire pressure?
Should be on the tire
300 series. 14psi front and 10 rear.