I think the debate is about over these days now that the benefits of energy savings and performance are known. Almost every front-load washer on the market today qualifies for the Energy Star certification. With an emphasis on the environment and energy savings these new front-load washers are making a big impact.
Front-load washers spin at a much higher speed than the older top-loading machines. Today’s front-load washers can spin as fast as 1,500 rpm compared to 600 rpm or less with the older top-loading machines which removes significantly more water during the spin cycle. As a result the energy (electricity or gas) needed to dry clothes is drastically reduced. Estimates from different sources estimate the reduced energy use by as much as 56%.
Another benefit to front-load washers is the lack of an agitator. Older top-loading washers have an agitator that rubs, pulls and stretches clothing in order to clean it. Front-load washers have no agitator and which results in less abuse (damage) to your clothing. The bottom line is your clothing will last longer and look nicer.
Front-load washers can washer larger loads of clothing because there is no agitator. Front-load machines are much better for washing large items like blankets, comforters, jackets and other unusual items. Front-load washers are also built today so you can stack them on top of the dryer. This results in a significant space savings if your home needs the extra floor space.
Until recently the front-loading washing machines were significantly more expensive than the older top loading models. However, now that the demand for front-load machines has increased so much the gap between them is shrinking. In fact, we just purchased our first front-load washer and dryer set because the prices have come down so much. Today it’s not hard to find a complete set for under $1,500 where the used to cost $2,000 and up. The difference in price will certainly pay off in a short time period with the energy and water savings.
Which is Better a Stick Nailer or Coil Nailer? Framers have many choices in nailers…
Estimating How Many Nails for a New Roof When it comes to estimating materials for…
Composite / PVC Decking Layout Tips and Advice Composite and PVC decking have really changed…
Benefits of ERV Systems (Energy Recovery Ventilator) If you're building a new home or doing…
Vermiculite Attic Insulation If your home was built before 1990 there is a chance it…
Arc Fault (AFCI) Circuit Breakers Tripping Often An arc-fault circuit interrupter (AFCI) or arc-fault detection…
View Comments
I have always heard that front load washers cause so many problems from leaks to trouble repairing them. I have a feeling that nowadays the machines have improved since front loaders are way more common now.
I spent so much on repairs for a top loader - it's six of one and half a dozen of the other these days, you're right, washing machines have come a long way.