FloLogic – Water Leak Detection

Every year the insurance industry pays out more than $10 billion in claims due to water damage. As a contractor I can tell you water damage repairs are not only expensive, but they are very disruptive and in most cases insurance doesn’t cover all the costs. With advancements in home automation technology there are products that can help prevent damaging water leaks. FloLogic is one of those products that provides peace of mind and the ability to shut down water to your home in the event of a leak even when you’re not home.

Plumbing Leak Control System

The FloLogic system is an automatic powered water valve that monitors water usage and has the ability to shut off the main water supply to a building in the event of a leak. It also has a temperature sensor allowing it to shut off the water supply in the event of a low temperature event that could cause pipes to freeze and burst.

The FloLogic system has a control board that allows users to see the status of the system and control it. Users can also have a wifi control board installed allowing the FloLogic Ap to be used for additional control and remote access when not at home. The system also includes a battery back-up to ensure the valve can operate even in a power outage.

FloLogic is available in several valve sizes including:

  • 1 Inch
  • 1.5 Inch
  • 2 Inch

FloLogic Features

  • Designed to continuously detect and automatically stop virtually all plumbing supply leaks, which affect 1-in-12 homes per year, starting at 0.5 ounce (1 tablespoon) per minute
  • Installing a FloLogic System qualifies many for home insurance discounts (ask your carrier)
  • Unlike water sensors, the FloLogic System detects all plumbing supply leaks: such as those in pipes, fittings, supply lines and appliances, including water heaters, washing machines and toilets
  • Identifies and stops damage-inducing AND water-wasting leaks alike and unlike cheap, plastic metering leak detection products, FloLogic sees small leaks in real time whereas others can not detect small leaks in real time
  • Comes with a standard 5-year warranty against manufacturer defects

 

FloLogic Installation

The FloLogic system should be installed by a licensed plumber. It needs to be installed where the main water enters the building as it will be the primary shut-off valve for the water supply.

It’s also a good idea to have the plumber install a bypass that allows the system to be bypassed for any maintenance or long term power outages.

The entire system was installed in about an hour and required several additional valves and some piping. Depending on plumbing rates in your area the cost to install the unit will likely run a couple hundred dollars depending on the access and how much additional plumbing is required to make room for the valve.

The setup of the control wiring and wifi module should be something most plumbers can handle if not it’s really straight forward and something a homeowner can do.

FloLogic Costs

The cost of the FloLogic system isn’t cheap but the cost of water damage repair isn’t either! The cost to repair a significant water leak can be in the thousands of dollars, throw in an insurance deductible and depreciation and you can still by on the hook for thousands of dollars after insurance. The FloLogic valves start at $1,795 for the 1-inch valve and go up to $2,995 for the large 2-inch valve. Some insurance companies offer a reduced coverage rate when the FloLogic system is installed so be sure to check with your agent.

FloLogic – Final Thoughts

The FloLogic system provides protection against costly water leaks and peace of mind even when homeowners are not home. The systems technology can sense even the smallest leaks and turn off water to the building preventing serious water damage in the event of a leak.

The easy to use Ap and control panel make this home automation an attractive option for protecting your most important investment. With technology like the FloLogic system homeowners can now monitor their home from afar and feel confident that their home is safe from water damage.

Todd Fratzel

I'm full time builder for a large construction company in New Hampshire. I run their design-build division that specializes in custom homes, commercial design-build projects and sub-divisions. I'm also a licensed civil and structural engineer with extensive experience in civil and structural design and home construction. My hope is that I can share my experience in the home construction, home improvement and home renovation profession with other builders and home owners. I'm also the Editor-in-Chief and Founder of Tool Box Buzz. Please feel free to contact me if you have any questions, suggestions or you'd like to inquire about advertising on this site.

Share
Published by
Todd Fratzel

Recent Posts

Framing Stick Nailer vs Coil Nailer

Which is Better a Stick Nailer or Coil Nailer? Framers have many choices in nailers…

12 months ago

How Many Roofing Nails Per Square of Shingles

Estimating How Many Nails for a New Roof When it comes to estimating materials for…

1 year ago

Composite / PVC Decking – Layout Tips & Advice

Composite / PVC Decking Layout Tips and Advice Composite and PVC decking have really changed…

1 year ago

Benefits of an ERV System (Energy Recovery Ventilator)

Benefits of ERV Systems (Energy Recovery Ventilator) If you're building a new home or doing…

2 years ago

Vermiculite Attic Insulation Abatement

Vermiculite Attic Insulation If your home was built before 1990 there is a chance it…

2 years ago

Nuisance Tripping of AFCI (Arc Fault) Circuit Breakers

Arc Fault (AFCI) Circuit Breakers Tripping Often An arc-fault circuit interrupter (AFCI) or arc-fault detection…

3 years ago