The Craftsman 12-Volt Lithium-Ion Hammerhead Auto-Hammer is a really cool new tool that’s similar to a pnuematic palm nailer except it’s in the shape of a hammer and it’s a battery powered cordless tool. The Auto-Hammer is not meant to replace the more powerful palm nailers but it is meant to provide another very versatile tool to any DIY handyman.
The nail sleeve works great at holding the nail while you drive the nail. My only complaint (albeit small) is when the nail gets down near the surface and the sleeve is no longer deep enough to hold the nail in place, the vibrations from the hammer action cause the driving head to bounce around all over the surface of the wood. You can overcome this by holding the tool carefully and focusing it on the head of the nail.
I made a very short videa clip of the Auto-Hammer driving a nail into a wood block.
The magnetic head is a great feature that allows you to start a nail without having your fingers in the way. The LED light is also great because so many projects end up in areas with poor lighting that this eliminates the need of carrying a flashlight around with you.
This is definitely a tool I’d recommend for the hobbiest / DIY / handyman type. Once again if you’re looking for a cool new tool for the man that has everything I think this is a great addition. Especially if you already own other 12-volt NEXTEC tools because the batteries are interchangeable. At around $100 it’s a great value for all the features it offers.
If you’re interested in buying the Craftsman Hammerhead Auto-Hammer then I suggest you check out the following link where it’s available at Sears:
Which is Better a Stick Nailer or Coil Nailer? Framers have many choices in nailers…
Estimating How Many Nails for a New Roof When it comes to estimating materials for…
Composite / PVC Decking Layout Tips and Advice Composite and PVC decking have really changed…
Benefits of ERV Systems (Energy Recovery Ventilator) If you're building a new home or doing…
Vermiculite Attic Insulation If your home was built before 1990 there is a chance it…
Arc Fault (AFCI) Circuit Breakers Tripping Often An arc-fault circuit interrupter (AFCI) or arc-fault detection…
View Comments
Sir-
I don't know where you performed your test, but I didn't have the same experience. The product struggled with anything but the smallest of nails. And if the pine was somewhat dense, it struggled overall.
Plus the noise was deafening. At the end of the day, using a real hammer was easier, quieter and a lot less expensive.
@ Guenther - We actually pointed out the limitations of the Auto-Hammer. It's certainly not intended to do large fasteners, however, it is very useful for smaller nails in very tight spots that a regular hammer will not fit into. Thanks for sharing your thoughts.
Hit the weights.
Had picked up an air power hammer for some small fencing jobs, but the idea of no power or air lines in the way would benifit the DIY chores like re-attaching trim & base boards
We have a large family and we have a big family wedding coming up at our home for which we are building a great big arbor(8x10x12) trimmed with white and silver tree branches covered with silk roses and twinkle lights. It is a really tricky project this hammer would be perfect for.
I am a very happy subscriber! Every time I read your newsletter, I learn something else I did not know which is fabulous. Thank you so much.
as a subscriber and wood worker this tool would come in very handy.
I only work in the house on small projects. Usually crafts. I think that this would be perfect for me. My husband handles the larger projects outside. Email subscriber.
I used the hammer to free up studs from broken bolts frozen in from sea water service. Soaked the broken studs overnight with pb blaster. In the am hit the studs with the vibrating hammer and used vice grips to remove. Was still hard to turn, but previously they broke with any twist ( using the useless Craftsman stud removess).