Guess what? A standard dimmer switch will not properly operate a fan motor. In fact, it’s most likely going to damage the fan motor and it could even potentially cause a fire. I’ll admit I even went out and bought a dimmer switch and I sat down to just “make sure” I was doing the right thing when I figured this out.
Standard dimmer switches are designed for the wattage of lights. Fan controls are designed for the amperage of the fan motor. So if you want to control the speed of a ceiling fan make sure you buy a fan speed control that specifically says it works for fans. Fan controls come in quite a few styles. The most common type has been around for quite some time and that is the rotary or dial type. The next most common fan control I found was the toggle that has three pre-set speeds (slow, medium and fast). You can also get a fan control that has a slider control along with a toggle switch.
Which is Better a Stick Nailer or Coil Nailer? Framers have many choices in nailers…
Estimating How Many Nails for a New Roof When it comes to estimating materials for…
Composite / PVC Decking Layout Tips and Advice Composite and PVC decking have really changed…
Benefits of ERV Systems (Energy Recovery Ventilator) If you're building a new home or doing…
Vermiculite Attic Insulation If your home was built before 1990 there is a chance it…
Arc Fault (AFCI) Circuit Breakers Tripping Often An arc-fault circuit interrupter (AFCI) or arc-fault detection…
View Comments
Good tip. I've always had an "intuition" about this - that it wouldn't work, but was never sure about it. Now I won't bother trying one day (and potentially burn down the house!!).
so, my electrician is in the middle of trimming out my house and I realized he installed one of these EXACT dimmer/toggle switches to my ceiling fan. the dimmer actually controls the speed of the fan but, as you said, I'm worried that it might start a fire or is not quite possibly safe for the fan motor. I'm going to ask him on Monday if we can actually use this switch for the fan.
what did you find out?
@ Sean,
There are fan controls that look like a dimmer...so he most likely installed the correct item. Just check with him for piece of mind.
Todd, I was really pleased to come across a blog like this one. Information galore! I work with a Leviton distributor and we've had this question on dimmer/ceiling-fan compatibility come up before. Just have to tell you that you've got great tips and insights.
Many thanks,
I had my doubts, but decided to try a regular dimmer anyway.
I bought all the stuff, and just before installing I read this.
So I will change my plans and thanks to you I might have avoided burning my house down.
I just purchased a new ceiling fan,a riviera amt brass 52", from dans fans. I had it installed by a licensed electriction. It's fine. The slow speed is to fast for nighttime sleeping. I have no way to install a "dimmer " switch. How can I slow the fan down?
Charles - The only way I'm aware of is to have a fan control installed on the power source. Your electrician should be able to do that for you.
Thanks for the info. Who ever put fan up in the past some how caught a live wire through the ceiling and uaed that. I don't where the wire goes to. Charlie
You could get an aftermarket remote control.
Hunter makes one. It installs in the housing of the fan and using a single power line allows you to control both the light and fan speed separately.
Jon - Thanks for the tip!
This is exactly the problem I have. Any help would be appreciated. I've looked at countless fan control switches but have no idea if they will do what I want done.