Kreg Jigs are extremely useful for creating pocket hole joints. I’ve come to love this great tool but it’s only effective when you have the proper screws to use with it. I’ve tried using other screws and it’s really pointless. If you’re going to spend the money on a Kreg Jig then be willing to spend the money on the Kreg screws. Trust me when I say you’ll be glad you did.
Which is Better a Stick Nailer or Coil Nailer? Framers have many choices in nailers…
Estimating How Many Nails for a New Roof When it comes to estimating materials for…
Composite / PVC Decking Layout Tips and Advice Composite and PVC decking have really changed…
Benefits of ERV Systems (Energy Recovery Ventilator) If you're building a new home or doing…
Vermiculite Attic Insulation If your home was built before 1990 there is a chance it…
Arc Fault (AFCI) Circuit Breakers Tripping Often An arc-fault circuit interrupter (AFCI) or arc-fault detection…
View Comments
Very good advice, especially if you're joining hardwood. The long, unthreaded shank is critical to pulling the joint tight without splitting the wood or stripping the threading in the hole. The flat bottomed head is also important because a cone head will just sink into the hole, act like a wedge and, again, possibly split the joint.
Don't use drywall screws in a pocket hole application. I learned that one the hard way.