Basically you design the kitchen cabinets just like if you were going to install a dishwasher. These units are typically about two feet wide and about 3 feet tall. You’ll need a power source located in the back of the cabinet space and that’s about it. The built-in kegerator just slides under the finished countertop and you plug it in. You’ll need to make a whole in the countertop so you can install the keg tap. In fact, the kitchen that I was involved with we had the granite countertop pre-drilled to the specified diameter. We then placed a thin piece of plywood under the countertop to give us material to attach the tap screws into.
Which is Better a Stick Nailer or Coil Nailer? Framers have many choices in nailers…
Estimating How Many Nails for a New Roof When it comes to estimating materials for…
Composite / PVC Decking Layout Tips and Advice Composite and PVC decking have really changed…
Benefits of ERV Systems (Energy Recovery Ventilator) If you're building a new home or doing…
Vermiculite Attic Insulation If your home was built before 1990 there is a chance it…
Arc Fault (AFCI) Circuit Breakers Tripping Often An arc-fault circuit interrupter (AFCI) or arc-fault detection…