Black & Decker 3.6V Lithium-Ion Pivot Driver Review

Black & Decker PD400LG Pivot Driver

Black & Decker continues to role out new products and the 3.6V Lithium-Ion Pivot Driver (PD400LG) is one of the latest new tools. Recently I wrote the SmartDriver review which is another similar low voltage driver but there is a big difference in the two. The new PD400LG Pivot Driver works in two different configurations: 90 degrees (drill style) as pictured to the right or as a stick driver (completely straight) as shown below.

PD400LG Pivot Driver Features

  • 2-Position pivoting handle for getting into tight spaces
  • LED Light ring improves visibility when working in dark areas
  • On-board bit storage for convenient bit access
  • Voltage – 3.6 V

  • Revolutions/Min – 180 rpm
  • Torque – 40 in-lbs

Product Impressions

I’ve never been a huge fan of the “stick” type drivers that were popular years ago. However, with the pivot driver you have the best of both worlds and that seems like a good design feature to have. The Pivot Driver is very comfortable in your hand and balanced well. The Pivot Driver also has a handy LED light built into the front of it to light up the work surface. Like most tools with LED lights my only gripe is I wish they could be turned on before the tool does so you can line up  your work.

The Pivot Driver is a great low voltage drill driver for small projects around the house. Definitely perfect for assembling furniture, kids toys, small electrical projects and small projects that require minimal torque. I’ve used the driver to take apart several childrens’ toys and electrical outlets that I was working on. This is definitely a handy tool to keep around the house for small tasks.

Where To Buy

Black & Decker products are available at most home centers. You can also buy it online from several sources including Amazon. The Black & Decker PD400LG costs under $30 and you can purchase it here.

Todd Fratzel

I'm full time builder for a large construction company in New Hampshire. I run their design-build division that specializes in custom homes, commercial design-build projects and sub-divisions. I'm also a licensed civil and structural engineer with extensive experience in civil and structural design and home construction. My hope is that I can share my experience in the home construction, home improvement and home renovation profession with other builders and home owners. I'm also the Editor-in-Chief and Founder of Tool Box Buzz. Please feel free to contact me if you have any questions, suggestions or you'd like to inquire about advertising on this site.

View Comments

Share
Published by
Todd Fratzel

Recent Posts

Framing Stick Nailer vs Coil Nailer

Which is Better a Stick Nailer or Coil Nailer? Framers have many choices in nailers…

11 months ago

How Many Roofing Nails Per Square of Shingles

Estimating How Many Nails for a New Roof When it comes to estimating materials for…

11 months ago

Composite / PVC Decking – Layout Tips & Advice

Composite / PVC Decking Layout Tips and Advice Composite and PVC decking have really changed…

12 months ago

Benefits of an ERV System (Energy Recovery Ventilator)

Benefits of ERV Systems (Energy Recovery Ventilator) If you're building a new home or doing…

2 years ago

Vermiculite Attic Insulation Abatement

Vermiculite Attic Insulation If your home was built before 1990 there is a chance it…

2 years ago

Nuisance Tripping of AFCI (Arc Fault) Circuit Breakers

Arc Fault (AFCI) Circuit Breakers Tripping Often An arc-fault circuit interrupter (AFCI) or arc-fault detection…

3 years ago